Digital
Servo Drives
- Self-Autotuning, no Trim Pots to Adjust
- Optically Isolated I/O for Noise Suppression
- Fiber Optic Digital Communication
- 3-axis Drive and Built in PLC for simple Installation
High Speed Machining
- 3D Contouring
- 2000 Line Lookahead for Accel / Decel
- 600 Block per Second Processing
- Unlimited Part Program Size*
Machine Control
- Jog Buttons for X, Y, Z, 4th
- Coolant Control
- Emergency Stop
- Feedrate Override
- Spindle Control
- Start / Stop
- Auto / Manual
- CW / CCW
- Speed Override
- Tool Check
- Cycle Start / Cancel
- Feed Hold
- Fast / Slow Jog
- Jog Increment (X1, X10, X100)
- MPG Enable
- Programmable Auxiliary Buttons (9)
Display
- Position (DRO)
- Distance To Go
- 2D / 3D & Run-Time Graphics (G-code Back-plot)
- Program Display
- Feedrate Display
- Message Display
- Standard or Metric Units
- Run Time & Parts Counter
- English, Spanish, French, & Chinese Languages
Tool Library
- 200 Position Tool Library
- Tool Length & Diameter Compensation
- Automatic Tool Length Measurement*
- Spindle Speed & Direction*
- Coolant Control*
Standard G&M Codes
|
| Conversational Part Program Software
- Extensive Canned Cycles
- Drilling
- Bolt Hole Circles
- Tapping*
- Boring
- Circular Pockets
- Rectangular Pocket
- Irregular Pockets
- Island Avoidance Pocketing
- Thread milling
- Position, Line, Arc Events
- DXF File Programming*
- DXF One-touch Engraving*
- Copy, Repeat, Rotate, Mirror
- Straight or Ramped Plunge
Moves
- Graphical Math Help for Missing
Information
- Linear and Polar Values
- 2D / 3D Anytime Graphics
- 4th Axis Programming*
- Absolute or Incremental Programming
Operation
- Closed-Loop DC Servo Motors
- 32 bit DSP Motion Control
Card
- Manual or CNC Operation
- Backlash Compensation
- Laser Ballscrew Compensation*
- 1MB Standard Program Size
- Teach Mode
- MDI Mode
Pre-Programmed PLC
- Lube
- Coolant
- Limit Switches
- Hi / Lo Spindle Range
- Inverter Control*
- E-Stop
- I/O Available: 36in / 39out
System Utilities
- Backup and Restore All Files
- USB, Floppy, RS232, Ethernet Support
- Disk Formatting
- PLC & System Diagnostics
- Import / Export File Operations
- Drag Plot
- Auto Tune
- Error Log
Advanced Programming
- User-Definable Variables
- Operator Prompts
- Math Computation within Program
- Conditional Statements*
Miscellaneous Features
- Full Screen G-code Editor
- Graphical Part Setup Menus
- Probing Cycles for Fast Setup*
- Digitizing with Mold Creation
Software*
- 2D / 3D Engraving*
- BCD Tool Changer Operation*
* Optional Features
|
