|
|
|
|
|
|
|
|
CNC
Mill / Router Kits
 |
 |
|
|
| |
|
This kit includes the electronics and software you
need to complete a CNC control installation. Typical
applications are desktop mills, knee mills, bed mills
and a wide range of sizes and types router tables including
plasma and laser cutting tables.
This Mill kit can be run as a true 2, 3, or 4 axis
CNC control and also in manual mode where the control
acts as a DRO.
You can even use this Mill kit with your original servomotors
and power supplies. If you don’t have servomotors,
no problem! AjaxCNC stocks a wide range of CNC
Components to complete any retrofit.
|
|
|
|
|
The Mill Kit Includes:
· 2GB
Solid State Hard Drive
· CNC10 Linux Control
Software
· PCI Motion Control
Card
· 3-Axis Digital Servo
Drive
· Pre-Programmed PLC
Inputs and Outputs
· Fiber Optic Cables
for Noise Suppression
|
|
· Conversational Programming
Software
· Installation and
Operator's manuals on CDROM
· Full Size Wiring
Schematic
|
|
|
|
Examples of Typical Mill Retrofit
Packages:
1. Knee Mill Retrofit using Existing
Servo Motors
Mill Kit
Control Pendant
(3) 2000 Line Encoder
(3) Encoder Cable Prewire
Cap & Bridge Combo |
$2379
$639
$375
$177
$69 |
| This retrofit package
is ideal for a knee or bed mill already equipped with
quality, DC servomotors. It allows you to reuse the
standard components like contactors and fuses, but will
save you hundreds of dollars by reusing the motors already
on the machine. You also save money by reusing the motor
transformer, which is already perfectly matched to your
motors. The new 2000 line encoders will dramatically
improve the speed, accuracy, and overall performance
of your mill. |
2. Knee Mill Retrofit with
New AjaxCNC Servo Motors.
Mill Kit
Control Pendant
(3) 29in-lb Servo
110V Power Supply Kit
(3) Motor/Encoder Prewire |
$2379
$639
$1815
$270
$327 |
| If your machine is equipped
with stepper motors, or the DC servos are not in usable
condition, this retrofit package is for you. You will
still retain the common components like contactors and
fuses, but the entire power supply and motors will be
replaced with brand new components. Each servomotor
includes a 2000 line encoder preinstalled to dramatically
increase the speed, accuracy, and overall performance
of your machine. |
3. Manual (non-CNC) Mill Retrofit.
Mill Kit
Control Pendant
(3) 29in-lb Servo motor
(3) Motor/Encoder Prewire
110VDC Power Supply
Spindle Reversing Contactors
E-stop Contactor
Rotary Disconnect
(3) Quencharc
Monitor/Keyboard Mounting Arm |
$2379
$639
$1815
$327
$270
$345
$115
$90
$9
$315 |
| If you have a manual mill you would like to convert to CNC, this is the package for you. We include all of the CNC electronics and software you need to automate your mill. You will only need to supply a PC, monitor, keyboard, electrical cabinet, and some misc. wire and connectors. For real CNC performance, you'll also want to replace the leadscrews with ballscrews and install better axis bearings. If you need any help choosing the right combination, just give us a call. |
|
| |
|
|
|
|
|
|
|
