Paul
Schaffner
 |
Everything is working great. It only took about 40 Hours
to do the whole installation, and that is with dismantling
each servomotor, turning down the shaft to except the .500
diameter encoders. I have always dreamed of having my own
CNC mill. I paid $1600.00 dollars for the Iron, and with the
Ajax control, I now have a state of the art machine, more
than I ever dreamed.
|
Alan
|
Just one word, thanks! The Bridgeport is working well. I
got a lot to learn but it really works great. I got a job
done -- about 3500 holes -- that all worked out. I will pass
the word about how good your product is. Thanks again for
all your help!
|
Brad
|
Got the kit, everything
looks to be intact and very professional (but you knew that).
Thanks a lot! |
|
Dave
Brown,
Dave Brown Products, Inc. / President, Association of Model Aeronautics (AMA)
|
I recently finished
the installation of an AJAX control on my old Hurco knee mill,
and I couldn't be happier with the results. Best move I've made
in a few years. Offline programming and downloading of the programs
is really efficient for our operation, and I even managed to
put the disk drive into the side of the cabinet, for easy access.
I'd recommend this control to anyone considering a conversion. |
Eric
Snow,
ET Precision Machine
|
You are more than
welcome to give my name and number to prospective
customers. I think the AJAX system is the best for the money
for do it
yourself types and really a good system. I'd recommend it to
anyone
who was interested. Looking at other systems in the past I'm
sure none
are as easy to build or learn to use. Cheers. |
Sam
Schnieder, Practical Solutions
|
When my old Hurco machine finally
died, I had to decide whether to repair this control built
in 1978 or update the control all together. I searched the
Internet and magazine adds and compiled a list of people that
built controls for Bridgeport machines.
I called them one by one asking
the normal questions but also some specific questions about
their controls and my machine. The toughest question seemed
to be "Will your control work with my motors?" Out of more
than ten of the best prospects the answers ranged from "No"
to "You will just have to try it".
I called AjaxCNC at the sales
office. They answered most of my questions right away. When
I came to the dreaded "Will your control work with my motors?"
question they gave me the standard "I don't know" but then
surprised me. The salesman added "I will find out and call
you back". He asked for all the info on my motors and did
call me back within 20 minutes assuring me that my motors
would work with your control. They do!
I have already recommended this
control to several others and so far have had one person drive
down from Philadelphia to see it. All persons that I have
sent to the web site have responded positively to me about
the control. At least two have confessed to me that they will
have to do something in the near future and said that this
control seems to have everything they need. The person from
Philadelphia has already contacted AjaxCNC and has been using
their demo software.
The control is very easy to install.
If I can do it, anyone can. I was unsure of several things
but when I called AjaxCNC they told me exactly what I needed
to do and I was up and running. Having never done anything
like this before, the hardest part of the installation was
where to lay out the components as I put the system together.
With a little help from AjaxCNC I went through the setup and
have already started writing programs with Intercon. Thanks
again for making this as painless as it was.
|
Chris
|
Super fast delivery!
Nice website for tech. support, nice product. A+++! |
Ken
|
Got the lathe kit
last week. Everything looks great, very professional. |
Trever
|
Hey guys - just
wanted to tell you I received package... Real nice!!! 1st class.
Pendant is beautiful! I wish I had bought this through Ebay
because I would give you guys an awesome feedback. Anyone looking
to retrofit.I promise to send them your way. I have to say the
Elrod ballscrew kit is good too. I am installing it now. Thanks. |
Ken
Moses, Fusion Inc.
|
We are using both
Ajax CNCs every day and they are working great. I wish my machine
was in an air conditioned room. It is amazing how well your
controls can take the temperature extremes! |
